SlipNOT® valuminum ladder rung covers are ideal for refurbishing old, slippery ladders. They fit over dangerous existing ladder rungs creating a safe climbing experience. They far exceed all ADA and OSHA recommendations for slip resistant products.
Product Information:
- Available thickness: 1/8”
- Available width: 1” or 1 ¼” to fit over ¾” or 1” diameter rungs.
- Available stock length: 144” (11’-13’ random)
- Customized sizes are available up to 144"
- Available SlipNOT® surface: Aluminum, Stainless Steel, Steel.
- Available in: Grade 1 (Fine), Grade 2 (Med.)
- Tolerance: Mill (144") or +/- 1/8"
Product Features:
- Application: Non slip ladder rung covers are designed for the modernization and restoration of worn and slippery ladder rungs by simply fitting channel-rung covers to existing round rungs and welding them into place. All SlipNOT® products are NSF registered.
- Availability: SlipNOT® slip resistant aluminum ladder rung covers can be purchased in stock sized rungs or can be cut to size in order to meet specific project requirements.
- Care: Ladder rungs have no adverse affects if exposed to weather when coated with aluminum and stainless SlipNOT®. Ladder rung covers coated with steel SlipNOT® should be galvanized or coated with a corrosion resistant paint.
- Durability: Aluminum ladder rung covers have proved extremely durable in very adverse conditions such as Steel Mills, Auto Plants, Oil Rigs, Oil Refineries, and many other locations. Aluminum rung covers coated with SlipNOT® have a bond strength of 2000 psi. If coated with steel or stainless steel rung covers have a minimum bond strength of 4,000 psi.
- Fabrication: Rung Covers can be cut by any means required, torched, sawed, sheared, etc. (Fabricating Specifics)
- Finishes: Aluminum ladder rung covers can be ordered with a mill finish or can be painted.
- Slip Resistant Standards: Rung covers exceed all requirements for coefficient of friction specified by ANSI, ASTM, ADA, NFPA, and OSHA (OSHA standard # 1926.1053 (a) (6) (i)). SlipNOT® ’s coefficient of friction is greater than or equal to .85. SlipNOT® products are U.L. approved. SlipNOT® is applied only to the topside of the rung. (Standards and Test results)
|
