SlipNOT® aluminum perforated plates are ideal for refurbishing old slippery platforms, stair treads, and walkways. It also flexes to reduce worker fatigue.
Product Information:
- Available stock thickness: 1/8,” 3/16,” 1/4”, or thicker
- Available stock width: 4’, 5'
- Available stock length: 8', 10’, 12'
- Customized shapes and sizes can be fabricated to meet job specifications.
- Available SlipNOT® surface: Aluminum, Stainless Steel, Steel
- Available patterns:
- 1/4” diameter on 3/8" staggered center
- 3/8” diameter on 9/16” centers
- 1/2” diameter on 11/16” centers
- 9/16” diameter on 3/4” centers
- A wide variety of options available
- Available in: Grade 1 (Fine), Grade 2 (Med.) (Grade 3 Coarse, only offered on Steel SlipNOT® surface.)
- Customized shapes and sizes can be fabricated to meet job specifications.
- Margins: Standard minimum margins, or customer specific
- Standard Tolerance: Mill or +/– 1/8”
Note: Perforation removes about 2/3 of the strength from the plate. Additional supports may be required.
Product Features:
- Advantages: SlipNOT® non slip aluminum perforated plates are lightweight, durable, and does not rust when coated with aluminum or stainless steel. If coated with steel, SlipNOT® plates must be protected with corrosion resistant paint. Perforated plates easily retrofit over existing grating. Perforated plates combine the flow through advantages of grating and the solid surface of a plate. Plates flexe when walked on to prevent worker fatigue. All SlipNOT® products are NSF registered.
- Availability: Plates are available in stock sizes or manufactured and fabricated to detailed print specifications.
- Care: The most effective cleaning method is with a steam cleaner or power washer. Debris can be removed with a stiff bristle brush. SlipNOT® recommends testing any chemical cleaning agent on a sample provided by SlipNOT® to verify that it is safe to use on the SlipNOT® surface.
- Durability: Aluminum perforated plates coated with aluminum SlipNOT® have a bond strength of 2,000 psi. If coated with steel or stainless steel SlipNOT® plates have a bond strength of 4,000 psi.
- Fabrication: Plates can be sheared, welded, flame cut, torch cut, laser or water-jet cut, plasma cut, countersunk, drilled and punched for complete versatility both in the shop and field. (Fabricating Instructions)
- Finish: Plate can be ordered in mill finish or painted.
- Slip Resistant Standards: Plates exceed all requirements for coefficient of friction specified by ANSI, ASTM, ADA, NFPA, and OSHA. SlipNOT®’s coefficient of friction is greater than or equal to .85. SlipNOT® products are U.L. approved.
Product Applications: Click on the application to learn more.
|
