Diamond Floor Plates - Aluminum, Stainless Steel & Galvanized Plating | SlipNOT® 

Diamond Floor Plates – Aluminum, Stainless Steel & Galvanized Plating

 

Dangerous diamond floor plates are used in many different industries in numerous applications. Traditional diamond floor plates continually fail to meet slip resistant standards. Unlike diamond floor plates, SlipNOT® non-slip floor plates exceed all ADA and OSHA recommendations and/or standards for slip resistance and are registered by NSF International for use in the food processing industry. While adding the SlipNOT® surface to existing diamond floor plates is an option, using SlipNOT® uniquely random stacked hatch matrix floor plating is less costly, safer and longer lasting.

SlipNOT® slip resistant floor plating is a safe alternative for diamond floor plates and is available in mild carbon steel, stainless steel, galvanized steel and aluminum plate. Commonly used for decks, catwalks, trench covers, and dock boards, SlipNOT® slip resistant floor plating provides traction in all directions.

For existing diamond floor plates, SlipNOT® flattened expanded metal Grid Grip® and perforated plate Flex Grip® are an easy solution for retrofitting over slippery diamond plate conditions. SlipNOT® perforated floor plates allow water, chemicals and other liquids to flow through, while providing workers with maximum protection. Like all SlipNOT® Metal Safety flooring materials, flattened expanded metal Grid Grip® and SlipNOT® perforated plates Flex Grip® can be welded to existing diamond plate structures or bolted in place for years of safety. Whether replacing dangerous diamond floor plates or retrofitting to diamond plate construction, SlipNOT® products are the one time answer to dangerous conditions that are created by traditional diamond plate.

Qualities for SlipNOT® products; alternatives for diamond floor plates:

  • Steel (Painted, Mill Finish or Hot Dipped Galvanized)
  • Stainless Steel
  • Aluminum
  • Thicknesses: 1/8″ and up
  • Stock Widths: 4′, 5′ or 6′
  • Stock Lengths: 8′, 10′ or 12′
  • Custom Sizes Available
  • SlipNOT® surfaces grades: Grade 1 (Fine), Grade 2 (Medium) or Grade 3 (Coarse – Steel surface only)
  • SlipNOT® metal surfaces: Stainless steel surface, Aluminum surface, Steel surface

Tested and durable, SlipNOT®‘s plate builds safety into new projects where diamond plate floor plates would fall short. The steel SlipNOT® surface can also be applied to aluminum substrates for a durable yet lightweight alternative, not available in diamond plating. SlipNOT® stainless steel surface can be applied to aluminum substrates for a lightweight, lower cost alternative to stainless steel on stainless steel.

SlipNOT® Diamond Floor Plates Applications:

  • Ramps
  • Bridge decks
  • Industrial flooring
  • Lightweight conveyor covers
  • Metal deck
  • Metal walkways
  • Pedestrian walks
  • Road plates
  • Platforms
  • Underground vault covers

Browse SlipNOT®‘s selection of Non-Slip Grip Plate.