SlipNOT® aluminum punched plank provides a strong, lightweight flooring alternative to bar grating and fiberglass. Punched plank with a SlipNOT® coating allows light and liquids to drain through, like bar grating, but provides the added slip resistant traction needed to prevent slip and fall accidents from occurring.

See SlipNOT® Specifications, CAD Drawings, COF/ADA and Case Studies regarding non-slip punched plank.

Product Information:

• Punched plank thicknesses: 3/4’’, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”
• Punched plank widths: 6”-36”
• Punched plank lengths: up to 20’
• Punched plank can be custom fabricated to meet job specifications
• Available SlipNOT® surfaces: Aluminum Surface on Aluminum, Steel Surface on Aluminum, Stainless Steel Surface on Aluminum
• Available SlipNOT® finishes: Mill or Painted
• Punched plank is available in: Grade 1 (Fine), Grade 2 (Medium) or Grade 3 (Coarse – steel surface only)
• Div 5 CSI Classification Code: Metal Gratings (05 53 00), Shop-Applied Coatings for Metal (05 05 13), Common Metal Materials (05 05 00), ADA Tactile Warning Surfaces (32 17 20)
• Available trim or load banded
• Standard tolerance: + / – 1/4”
• LEED: The recycled content of SlipNOT® products varies depending on the source of the substrate. However, based off of an average provided by the mills and vendors we use most often, SlipNOT® products have a minimum of 40% recycled content and up to 83% recycled content. By specifying SlipNOT® products your project may be eligible for LEED credits. For more information please visit our green products page.

Product Features:

• Advantages: In areas where toxic fumes and fireproofing are concerns, SlipNOT® non-slip punched plank is an ideal alternative to fiberglass.  Industries such as water and waste water treatment plants use punched plank to provide slip resistance in areas where slippery substances are prevalent.
• Availability: Punched plank can be purchased in stock sizes or cut to size and custom formed for specific project requirements.
• Durability: Punched plank coated with aluminum SlipNOT® has a bond strength of at least 2,000 psi.  If coated with steel or stainless steel SlipNOT®, punched plank has a bond strength of at least 4,000 psi.
• Environments: SlipNOT®’s non-slip stainless steel coated products test for microbiological and fungal matter the same as normal stainless steel products.  SlipNOT® premier products can withstand the extreme cold of cryogenics and heat of cookers and steamers, as well as daily washdowns and caustic cleaning agents.  Molten glass and metal milling facilities use SlipNOT®  because of its ability to withstand extreme temperature ranges.  Easy to install, SlipNOT® products create little installation down time.  SlipNOT® is a low maintenance, sanitary solution for slippery areas in bottling facilities, freezers, packaging and processing areas, platforms, catwalks, crossovers, and many others.
• Fabrication: Non-slip punched plank can be sheared, welded, flame cut, torch cut, laser or water jet cut, plasma cut, countersunk and drilled for complete versatility, both in the shop and field. (Fabricating Instructions)
• Pattern: Punched plank is provided with a rectangular punched pattern or with an ADA diagonal punched pattern.
• Slip Resistant Standards: Punched plank meets and exceeds all the requirements for an ASTM / ANSI slip resistant surface and is registered slip resistant with Underwriters Laboratories per the UL 410 standard.  SlipNOT®‘s coefficient of friction is greater than or equal to 0.85.

ADA Information:

• SlipNOT® punched plank far exceeds all ADA requirements.
• See all Standards and Test Results

SlipNOT® Plank:

Below is a common example of punched plank. Other styles available upon request.

SlipNOT® Specifications:

SlipNOT® Current Specification:
SlipNOT® Specifications for Grade 1.pdf
SlipNOT® Specifications for Grade 2.pdf
SlipNOT® Specifications for Grade 3.pdf

CSI 3 Part Spec:
CSI 3 PartSpec.pdf
CSI 3 Part Spec.doc

SlipNOT® products are utilized by countless industries for a vast array of applications. SlipNOT® products are fabricated to meet detailed specifications and can meet the requirements of the most complex projects. SlipNOT® slip resistant products are proven and utilized by fortune 500 companies across North America.

Click on the example product applications to learn more:

• ADA slip resistant ramps
• Anti-slip walkways
• Bridge walkway
• Mass transit platforms
• Non-skid marine and ship decks
• Non-slip ramps
• Slip resistant mezzanines
• Slip resistant platforms
• Truck platforms/decks
• Wastewater treatment plants

To view all SlipNOT® applications click here.

SlipNOT® case studies educate customers and prospects on how SlipNOT® products are utilized in various fields. The versatility of SlipNOT® products is proven through these safety solutions:

View Case Studies by Product
View Case Studies by Industry