SlipNOT® anti-slip steel ladder rungs provide essential safety for ladder construction. SlipNOT® ladder rungs give ladders a larger and more stable anti-slip surface, which is more comfortable to grab. Ladder rungs exceed all requirements for coefficient of friction specified by ANSI, ASTM, ADA, NFPA, and OSHA (OSHA standard # 1926.1053 (a) (6) (i)).
Product Information:
- Available shape: round, square, or tubes.
- Available thickness: 3/4” and 1”, or as needed
- Available stock length: 120”
- Available in customer specific lengths up to 120"
- Available SlipNOT® surface: Stainless Steel
- Available in: Grade 1 (Fine), Grade 2 (Med.)
- Tolerance: Mill (120"), or +/ – 1/8”
Product Features:
- Advantages: SlipNOT® steel ladder rungs have an unmatched surface hardness and a long life. SlipNOT® non slip steel ladder rungs provide a permanently safe surface for new ladder construction. Our products are also NSF registered.
- Availability: SlipNOT® slip resistant steel ladder rungs can be purchased in stock sized rungs or can be cut to size in order to meet specific project requirements.
- Care: If rungs are to be exposed to the weather, some sort of treatment (either priming/painting or hot dip galvanizing) is required. (Guidelines for Galvanizing)
- Durability: Steel non-slip ladder rungs coated with SlipNOT® have a file hard surface of over 55 on the Rockwell “C” scale and a bond strength of over 4000 psi.
- Fabrication: Steel ladder rungs can be flame cut or cut with any standard band saw, chop saw, or other means. The surface can be welded, and there is no need to grind the ends for assembly. Rungs can be welded directly into the sides of support stringers then painted or galvanized as needed. (Fabricating Specifics)
- Finishes: Steel ladder rungs can be ordered in mill finish or painted. Ladder rungs can be galvanized after ladder is fabricated. (Guidelines for Galvanizing)
- Slip Resistant Standards: Steel ladder rungs exceed all requirements for coefficient of friction specified by ANSI, ASTM, NFPA, and OSHA. SlipNOT®’s coefficient of friction is greater than or equal to .85. SlipNOT® products are U.L. approved. SlipNOT® is applied only to the topside of the rung. (Standards and Test Results)
|
